ADJ Sweeper Beam Quad LED 64W RGBW Moving Bar Light Stand Package
Ships within a few days. Usually delivered on when you order within .
Gearooz presents this unique sweeping quad LED light effect package. The system contains 2x ADJ Sweeper Beam Quad LEDs, stands and clamps. Mount the Sweepers vertically down the stands to create the ultimate sweeping beam effect. The system features RGBW LEDs which fill the room with multicoloured beams that move and sweep in a 270 degree tilt. Connect the 2 bars together with DMX for a synchronised lighting show.
This unit features 8x 8W RGBW LEDs with a 3.4 degree beam angle. Create amazing sweeping lightshows with these chasing, strobing, pulsing 8-Zone LEDs. The bar itself sweeps 270 degrees allowing razor sharp beams to hit every part of the venue! The Sweeper Beam is fully controllable via DMX, sound or auto modes and is also compatible with the ADJ UC3 controller.
Sweeping quad colour RGBW LED effect light
270 degree tilt from smooth Stepper Motors
Extremely Long Life (50,000 hr. rated)
Beam angle: 3.4 degrees
Runs extremely cool! - NO Duty Cycles! – Run all night!
Includes mounting brackets to mount on a wall or set on the ground
Safety hook on rear panel
Very low power consumption - connect more units in a single circuit
IEC AC IN/OUT on rear to daisy chain power (up to 4 Sweeper Beam Quad LED’s @ -20V and 7 Sweeper Beam Quad LED’s @ 230V )
Compatible with ADJ UC3 Series easy-to-use controllers (sold Separately)
Unique lighting fixture with quick sweeping narrow beams combined with an 8-Zone LED chase
8x 8-Watt RGBW LEDs
4-Button DMX LED Display
3 Operational modes: DMX controller, Master/Slave & Sound Active
4 DMX Channel modes: 1 Channel, 6 Channels, 35 Channels, & 39 Channels
Electronic Dimming: 0 - 100%
Includes exciting sound activate built-in programs
LED pulse & strobe effect
Power Consumption: 81W maximum
Multi-voltage operation: AC 100-240V 50/60Hz- IEC socket
Dimensions (L x W x H): 973 x 73 x 132mm
|Manufacturer Product Code||1237000082|