Complete FBT Vertus system with CLA 604 top, CLA 208 SA Active subwoofer, 35mm mounting pole & VT-S 604 stand adaptor.
CLA 604 Column
Ideal for both live applications, assisted by the CLA 208SA active subwoofer, as well as for fixed installation
Long distance sound projection and better SPL distribution towards the audience
Extruded-aluminium powder-coated cabinets.
Superior as well as inferior latching system
Enables the extension of the length of the line array adding CLA604A modules for a greater modularity of the system
Possibility to angle the columns of plus - minus 30 degrees on a horizontal plane.
High-level sound quality from 50Hz to 20kHz expressly developed for live performance
Great and dynamic power performance thanks to tri-amplification system. Lightweight and easy to carry.
Design and elegance for an easy integration even in the most demanding installations
Very compact dimensions enable the listener to concentrate on sound and not on speakers!
High horizontal dispersion
Built-in amplifier cont. rms LF/HF W 350/80
Built-in amplifier max. rms LF/HF W 400/100
Built-in amplifier max. peak LF/HF W 800/200
Frequency response @-6dB 130Hz - 20KHz
Low frequency woofer inch 6 x 4" - 1" coil
High frequency driver inch 4 x 1" - 1" coil
Maximum SPL cont/peak dB 122 / 125
Dispersion H x V 100 x 20 degs
Input impedance kOhm 22
Crossover frequency kHz 2.5
AC Power requirements VA 450
Input connectors XLR with loop
Power cord m/inch 5 / 16.4
Net dimensions (W x H x D) 130 x 841 x 130mm Net weight kg 9
Transport dimensions (W x H x D) 220 x 930 x 220mm
Transport weight kg/lb 11.5 / 25.35
CLA 208 SA
Class D 600W RMS amplifier with switch mode power supply
DSP processor with 4 available presets
Active subwoofer in bass-reflex design. 50Hz to 180Hz frequency response
2x 8” (200mm) custom neodymium, high-excursion woofer with 2” (50 mm) voice coil
Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED
Neutrik POWERCONN input and link
15mm birch plywood enclosure with anti-scratch paint finish, stackable
M20 stand adapter, 2 integrated handles, front hardware to sustain CLA206LA modules
Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance
|Manufacturer Product Code||34549|