FBT Vertus CLA 604A Active 6 x 4

FBT Vertus CLA 604A Active 6 x 4" 500W Line Array Speaker

FBT Subline 15SAC 600W RMS Active Subwoofer DJ PA Bass Speaker

FBT Subline 15SAC 600W RMS Active Subwoofer DJ PA Bass Speaker

FBT Vertus CLA 208 SA 600W RMS Active Subwoofer

CLA208SA 129dB SPL Processed Active Sub

Ready To Go

Ships for delivery on when you order within and select express delivery at checkout.

In stock

The FBT 208SA is a powered, 400W RMS subwoofer with twin eight-inch drivers housed in a low-profile reflex enclosed cabinet. It's a very compact unit, and the dark birch-handle cabinet and thick steel grille provide a discreet appearance. The CLA 208sa is intended to act as a base backing for the CLA 604a, and is furnished with a decent metal-screw shaft mount on top. There is, additionally, the alternative of mounting different top sections to a steel plate on the front of the sub, by means of three settling pins.


Stereo XLR inputs are summed and sent to the inside amp, and a choice of direct link or high-pass filtered outputs is provided, and the ability to switch input polarity. Similar to the CLA 604A, there are input level and EQ knobs, but this time the four EQ settings offer options for the sub's upper cutoff frequency (either 120Hz or 180Hz), and also 'original' or 'punch' curves for each option. The 'original' EQ is the default setting, with the subwoofer operating its full range. The 'punch' EQ provides more output in the mid range, giving a thumpy kick, but with some loss of the very low-end output.



     Class D 600W RMS amplifier with switch mode power supply
     DSP processor with 4 available presets
     Active subwoofer in bass-reflex design. 50Hz to 180Hz frequency response
     2x 8” (200mm) custom neodymium, high-excursion woofer with 2” (50mm) voice coil
    Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED
    Neutrik POWERCONN input and link
    15mm birch plywood enclosure with anti-scratch paint finish, stackable
    M20 stand adapter, 2 integrated handles, front hardware to sustain CLA206LA modules
    Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance

More Information
Manufacturer Product Code 34548
Condition New
Warranty 3 Years