Included in this bundle:
- 2 x TEK12v2
- 2 x TEK15S subwoofers
- 2 x TEK Audio steel speaker poles
- 2 x *6m Clubtek XLR male to XLR female leads (*comes as standard)
- 2 x 3m Clubtek XLR male to XLR female leads
Pair of TEK12 Version 2 Active Loudspeakers with Pair of TEK15S Subwoofers, Poles and Cables
This bundle packages stands and cables with two of the new TEK12 v2 active speakers and two 15" TEK15S Subwoofers.
TEK12 Version 2
The new and improved TEK12 V2 delivers incredible power, even clearer sound and new advanced Bluetooth functions including stereo speaker linking
The TEK audio Active TEK15 V2 has a newly redesigned aesthetically pleasing ABS enclosure with 3 handles (strategically placed on top/bottom/side). The TEKs are equipped with a redesigned powerful 1600W class-D amplifier with stereo Bluetooth® and an integrated mixer with two Mic/Line input channels. The Mic/Line channels feature XLR/TRS combo jacks and can be used with line-level signals, microphones, and instruments, the Mic/Line switching is achieved via a recessed push button to prevent accidentally switch to MIC, plus a DSP processor with four selectable modes:
- Flat Mode: A neutral and unprocessed sound, with a full frequency range. Ideal for recorded music.
- Contour/Boost Mode: Emphasises low and treble frequencies – giving you a more pronounced bass that's perfect for dance music. Ideal for parties and DJs.
- Speech Mode: Reduces the low end and emphasising the upper mid-range (which is where the human voice sits on the frequency spectrum). This enhances speech clarity and ensures your audience can hear every word.
- EXT Sub Mode: When the speaker is being used in conjunction with a separate subwoofer. This pre-set enables a High Pass Filter (HPF) set at 100Hz.
The TEKaudio series is driven by a high-performance compression driver tweeter to produce a sharp clean top-end and a high-power woofer that gives a tight bass response you feel in your chest. The speakers deliver unbelievable sound quality and are perfect for DJs, clubs, bands, front-of-house and stage monitoring applications.
The enclosure is moulded from high-strength polypropylene, with a sturdy design to handle the high power of the drivers. The innovative dual-position pole mount supports normal full forward or downward tilt by 12 degrees.
Non-slip rubber feet make it sit safely on its base or as a stage wedge. Its 5 M8 flying points support hanging it in any orientation.
Specifications:
Titanium Driver: 1” Throat, 2” VC
Woofer: 12”, 3” VC
Amplifier: CLASS D Bi-AMP
Bluetooth: Stereo Wireless Music Streaming
Frequency Range: 50Hz-20kHz
DSP: With DSP Processor and 4 Modes
Mic Input: XLR or 1/4” Jack combo plug
Line Input: XLR or 1/4” Jack combo plug
Line Output: XLR
Power: 800W Continuous
Max SPL: 126dB
Power Voltage: AC220V - AC240V
Dimensions (WxDxH): 370x375x615mm
Weight: 20.5kg