TEK audio 15" TEK15 Neo Active Speaker 1600W

£449.00 £404.10
More than 5 available
SKU: 185039
In Store

In Store

Order by 1pm weekdays for same day shipping.

In StockIn Stock

The new TEK15 Neo Speaker delivers powerful, crystal-clear sound featuring a high-power Neodymium Woofer. Designed for professional audio setups, this speaker offers superior performance with lightweight construction, making it ideal for live events, venues, and portable sound systems. With new advanced Bluetooth functions including stereo speaker linking.

The TEK audio Active TEK15 Neo has a newly redesigned aesthetically pleasing ABS enclosure with 3 handles (strategically placed on top/bottom/side). The TEKs are equipped with a redesigned powerful 1600W class-D amplifier with stereo Bluetooth® and an integrated mixer with two Mic/Line input channels. The Mic/Line channels feature XLR/TRS combo jacks and can be used with line-level signals, microphones, and instruments. The Mic/Line switching is achieved via a recessed push button to prevent accidentally switch to MIC, plus a DSP processor with four selectable modes:

  • Flat Mode: A neutral and unprocessed sound, with a full frequency range. Ideal for recorded music.
  • Contour/Boost Mode: Emphasises low and treble frequencies – giving you a more pronounced bass that's perfect for dance music. Ideal for parties and DJs.
  • Speech Mode: Reduces the low end and emphasises the upper mid-range (which is where the human voice sits on the frequency spectrum). This enhances speech clarity and ensures your audience can hear every word.
  • EXT Sub Mode: When the speaker is being used in conjunction with a separate subwoofer. This pre-set enables a High Pass Filter (HPF) set at 100Hz.

The TEKaudio series is driven by a high-performance compression driver tweeter to produce a sharp clean top-end and a high-power Neodinium woofer that gives a tight bass response you feel in your chest. The speakers deliver unbelievable sound quality and are perfect for DJs, clubs, bands, front-of-house and stage monitoring applications.

The enclosure is moulded from high-strength polypropylene, with a sturdy design to handle the high power of the drivers. The innovative dual-position pole mount supports normal full forward or downward tilt by 12 degrees.

Non-slip rubber feet make it sit safely on its base or as a stage wedge. Its 5 M8 flying points support hanging it in any orientation.

Specifications:

Titanium Driver: 1” Throat, 2” VC

Woofer: 15”, 3” VC

Amplifier: CLASS D Bi-AMP

Bluetooth: Stereo Wireless Music Streaming

Frequency Range: 45Hz-20kHz

DSP: With DSP Processor and 4 Modes

Mic Input: XLR or 1/4” Jack combo plug

Line Input: XLR or 1/4” Jack combo plug

Line Output: XLR

Power: 800W Continuous

Max SPL: 128dB

Power Voltage: AC220V - AC240V

Dimensions (WxDxH):  435x410x710mm

Weight: 20.5kg